Select Page

Toro Sand Pro® 3040

Toro Sand Pro® 3040

The Sand Pro® 2040Z mechanical rake is unlike anything else in the marketplace; a zero-turn mechanical groomer delivering unmatched maneuverability and productivity. This unique machine is a daily bunker rake that will reduce labor costs for both mechanical and hand raking of bunkers and infields. A brand new “flex” raking system with the patented “lift in turn” feature enables an operator to turn tightly in bunkers without leaving unraked teardrops or tire marks.

Quick Quote

Name(Required)

More Info

• The zero-turn steering design allows easy grooming that other machines cannot access. Ultimately reducing grooming time with its power steering via two independent control sticks.
• This unique 84-inch (213 cm) wide flex tooth rake features three reversible rubber trowels that reduce damage to bunker liners and edges. Each of the rake's three sections moves independently to follow bunker contours. The flex tooth rake has adjustment stops for pivot, rake pitch and "lift in turn" height.
• The Sand Pro 2040Z transports at 12 mph (19.3 km/h), 20% faster than other Sand Pro models.
• The rear attachment is easily operated through a thumb switch on the right hand control stick. The hydraulic lift system is safe and quick, allowing the operator to enter and exit bunkers quickly.
• The unitized transmission design consists of two independent unitized pump and wheel motor assemblies that minimize hydraulic lines and connections for reliable, low-maintenance performance.
• This patented feature makes the inside flex tooth rake section lift in a tight turn preventing teardrop formation, leaving a uniform surface.
• The Sand Pro 2040Z's twin cylinder, air-cooled Kawasaki® 12.2 hp (9.1 kW) gasoline engine is powerful enough to easily climb over tough terrain and quickly transport over hills without bogging down. The single-stage cyclonic air filter keeps the engine running cleanly in the dustiest conditions.

Specification
Air Filter: Heavy-duty single stage cyclonic air filter with replaceable element
Alternator: 20 amps
Battery: 12V
Brakes - Rear: Hydrostatic
Controls: Ignition: Off/Run/Start; Throttle: Low - High Idle; Choke: Opens/Closes choke plate; Parking Brake: Off - On
Cooling System: Air Cooled
Displacement: 603cc (36.7 ci)
Frame: Rectangular structured steel tube and high strength steel plate welded construction. Four tie down loops, one located on each corner of the machine.
Fuel / Power Source: Gasoline
Fuel Capacity: 4.5 gallon (17 liter)
Gauges/Instrumentation: Hour meter, Low Battery LED will illuminate if key voltage is less than 12.3V in run position
Ground Clearance: 5.5" (14 cm) at machine centerline using 24" (61 cm) tires
Ground Speed - Forward: 0 - 12 mph (0 - 19.3 km/h)
Ground Speed - Reverse: 0 - 4 mph (0 - 6.4 km/h)
Height: 73" (185 cm)
Hydraulic Oil: Factory fill Mobil fluid 424 tractor transmission fluid; Left hand transmission section: 3.36 qt. (3.18 liters); Right hand transmission section: 3.99 qt. (3.77 liters).
Inside Turning Radius: 0" (0 cm)
Interlock: Safety interlocks for operator presence, neutral and parking brake
Oil Capacity with Filter: 1.7 quarts
Optional Accessories: Light Kit, Speed Limiter Kit, Transport Speed Limiter Kit, Seat Suspension Kit, Mesh Bag Kit, Turf Trac Tire, Bimini Sunshade, Rake Holder Rear Attachments: Flex Tooth Rake, Broom Finishing Kit, Nail Drag, Drag Mat Finishing Kit
Overall Width: 71.5" - 84" (182 - 213 cm) with rear attachment
Power Rating: 13.6 hp (10.1 kW)
Power Steering: Yes
Power Train (Engine Description): Kawasaki® 2-cylinder, air-cooled, gas engine; Gross HP 13.6 HP (10.1 kW), Governed HP 12.2 HP (9.1 kW) @ 2400 rpm; Max torque 27.3 ft-lbs (37.0 Nm) @1800 rpm; Displacement 36.7 cu-in. (603 cc); Oil Filter External, spin-on.
Product Length: 84.8" - 89" (215 - 226 cm) with rear attachment
Rear Attachment Hydraulic Lift: Standard
Roll-Over Protection (ROPS): Standard
Sound Level: 88 dBA at operator ear
Steering System Description: Controlled through two independent control sticks with integrated dampeners. Min. turning radius: 0" (0 cm).
Tires - Front: 16" x 7.5" - 8", 4-ply, Turf Tire
Tires - Rear: 25" x 12" - 9", 3-ply, Knobby Tread (Turf Tamer)
Traction Drive: Belt driven independent infinitely variable unitized transmission, with automatic tensioning system
Vehicle Configuration: Standard
Weight: 920 - 970 lbs. (417 - 439 kg) with rear attachment
Wheelbase: 58" (147 cm)

Additional information

Fuel/Power Source

Series:

The Sand Pro® 2040Z mechanical rake is unlike anything else in the marketplace; a zero-turn mechanical groomer delivering unmatched maneuverability and productivity. This unique machine is a daily bunker rake that will reduce labor costs for both mechanical and hand raking of bunkers and infields. A brand new “flex” raking system with the patented “lift in turn” feature enables an operator to turn tightly in bunkers without leaving unraked teardrops or tire marks.