Select Page

Toro STX-26 Stump Grinder

Toro STX-26 Stump Grinder

Some dedicated stump grinders are over-complicated. Not the Toro STX. Its patented Toro® Dingo® TX-style control system has two simple levers that are simple to learn, master and use. Combine these easy-to-use controls with tracks and transport speeds exceeding 4 mph, and you get maximum productivity. The Intelli-Sweep® feature automatically slows the sweep speed of the cutting head based on the load of the wheel, so heavy cutting loads won’t bog down the engine. The tracks travel easily over muddy areas, with the low center of gravity adds side hill stability for access to any job, in any condition. In addition, the hydraulically driven head means no chance of expensive belts breaking or slipping, and no adjusting tension – guaranteeing optimal performs time after time.

Quick Quote

Name(Required)

More Info

• Intelli-Sweep® automatically adjusts cutting head sweep speed
• Turn stumps to chips quickly
• Hydraulically driven cutting head
• No tire ruts or flat tires

Specification
Cooling System: Air Cooled
Cutter Depth Below Grade (inches): 12.5
Cutter Height Above Grade (cm): 83.8
Cutter Height Above Grade (inches): 33
Engine Make: Kawasaki
Engine Model: FX-730V Twin Cylinder
Fuel Type: Gasoline
Ground Speed Forward (km/h): 6.7
Ground Speed Forward (mph): 4.2
Ground Speed Reverse (km/h): 2.5
Ground Speed Reverse (mph): 1.6
Head Swing Arc Length (cm): 119.3
Head Swing Arc Length (inches): 47
Head Swing Sweep Arc (cm): 119.3
Head Swing Sweep Arc (inches): 47
Hydraulic Flow Traction: 13.5 gpm hydraulic flow to cutter head; 10 gpm of hydraulic flow to each track
Overall Height (cm): 116.8
Overall Height (inches): 46
Overall Length (cm): 198.1
Overall Length (inches): 78
Overall Width (cm): 86.3
Overall Width (inches): 34
Weight (kg): 544.3
Weight (lbs): 1200
Wheelbase (cm): 48.2
Wheelbase (inches): 19

Additional information

Fuel Type

Product Type

Cutter Depth Below Grade

Cutter Height Above Grade

Some dedicated stump grinders are over-complicated. Not the Toro STX. Its patented Toro® Dingo® TX-style control system has two simple levers that are simple to learn, master and use. Combine these easy-to-use controls with tracks and transport speeds exceeding 4 mph, and you get maximum productivity. The Intelli-Sweep® feature automatically slows the sweep speed of the cutting head based on the load of the wheel, so heavy cutting loads won’t bog down the engine. The tracks travel easily over muddy areas, with the low center of gravity adds side hill stability for access to any job, in any condition. In addition, the hydraulically driven head means no chance of expensive belts breaking or slipping, and no adjusting tension – guaranteeing optimal performs time after time.