Select Page

Ventrac AERA-Vator

Ventrac AERA-Vator

The AERA-vator is designed to stir and loosen the soil beneath the sod without destroying the turf. The EA600 creates a core hole without bringing a core plug to the surface, leaving the turf ready for use immediately after treatment. Nine holes are created each foot (97 holes per square meter) and hole size is regulated by drive speed– the slower the drive speed, the larger the hole. The AERA-vator works best in dry un-irrigated ground leaving a core hole while fracturing the sub soil.

The EA600 is built with Ventrac Mount System, allowing for easy attachment changes, and comes with a standard jack stand for easy mounting.

Quick Quote

Name(Required)

More Info

Tines: 9/16 x 3 1/2 inches (1.4 x 9 cm)
Vibration Depth: 2 3/4 inches (6.9 cm)
Aeration Density: 9 holes per ft2 (97 holes per m2)
Shaft Speed: 800 cycles/minute
Optimal Engine Speed: 3200 RPM

Additional information

Weight 420 lbs
Dimensions 34 × 66 × 22 in
Attachment Type

Series:

The AERA-vator is designed to stir and loosen the soil beneath the sod without destroying the turf. The EA600 creates a core hole without bringing a core plug to the surface, leaving the turf ready for use immediately after treatment. Nine holes are created each foot (97 holes per square meter) and hole size is regulated by drive speed– the slower the drive speed, the larger the hole. The AERA-vator works best in dry un-irrigated ground leaving a core hole while fracturing the sub soil.

The EA600 is built with Ventrac Mount System, allowing for easy attachment changes, and comes with a standard jack stand for easy mounting.